Showing posts with label Table Mat. Show all posts
Showing posts with label Table Mat. Show all posts

Sunday, March 13, 2011

Easy pinwheels plus a finished project


This pinwheel technique is not my creation, but it bears repeating. It's fun and quick and works for any size pinwheel.

Put two squares right sides together. Any size. Stitch 1/4" on all sides.
(I used 5" squares for the mug rugs.)


Slice with a rotary cutter corner to corner. Don't move the square, move your ruler, and slice from other corner to other corner.


Like this.


Press seams to the dark side.

Sew squares together by twos. See layout above.


When you stitch your seam that joins the doubled up squares, use this awesome matching technique: poke a pin through the intersection of the seams as shown above. Continue on poking the pin through the intersection of the seams on the other side. Line up the pin vertically and those points should be perfectly lined up.

Stitch your seam right through that intersection and they should be perfectly matched. Or at the worst a teeny bit off, which is close enough for me.

I sewed a rectangle of focus fabric to the pinwheel. Size doesn't matter.


Sandwich your top, batting, and backing. Baste with pins. Quilt as desired. I quilted a wavy line pattern. Cut the backing about 1/2" larger on all sides and double-fold it to the front. Top-stitch close to the edge.


I stitched up a table mat to match. 


This collection was shipped off to my sweet kids in Atlanta. They match their aprons. The package was opened and produced much excitement. Success! 

Friday, May 21, 2010

Super cute project -- from four fat eighths!


It's a table mat. It's a basket liner. It's a fun and quick project! 


You will need four fat eighths plus coordinating rickrack trim. 



Sew the fabric pieces together in pairs along the longest side, with rickrack in between. 

No pics of the rickrack insertion but here's how I did it: 1) Place rickrack on right side of fabric, along the longest side. Stitch right down the middle of the rickrack. 2) Sandwich rickrack between the two pieces of fabric, right sides together. Stitch through all layers carefully using the seam you already stitched as a guide. Press from right side, pressing all seams to one side. Topstitch through all layers of fabric. (See photo below.)


Place sewn together pairs of fabric right sides together. Line up and trim edges to match neatly. I waited until now to trim the selvage.


Sew a 3/8 inch seam on all 4 sides, leaving about 4-5 inches open for turning. Clip corners and turn to right side. Press.


Top stitch 1/8 inch along all sides. Press again.


Enjoy your bowl liner...basket liner...table mat...whatever!


Be sure to visit  Sew & Tell Fridays. Lots of eye candy this week!
Related Posts Plugin for WordPress, Blogger...